What my car should look like when finished - Stoneleigh 2015

Thursday, 11 January 2018

Windscreen Escutcheons

I formed the windscreen escutcheons in the vice using a plastic hammer, and also used a rounded piece of wood to try to form a neat curve to match the bodyshell profile.  The body curves in many ways, so it took a little bit of fettling to get it to look neat.

I then finally polished the escutcheon edges and M4 button head set screws on the polisher before fitting.

I added some extra sealant around the plate prior to fitting, and then cleaned off the excess.  I will polish the escutcheons and surrounding areas once the sealant has cured.

No comments:

Post a Comment