What my car should look like when finished - Stoneleigh 2015

Thursday, 11 January 2018

Fuel Rail Hose Supports

Since the IVA requires all hoses or wires to have fixings at a minimum of 300mm, I had to create some more mounts for the hydraulic clutch hoses & fuel hoses, especially around the fuel rails.

I fabricated some twisted stainless brackets to fit underneath the transmission tunnel, and some small brackets to fix the fuel hose to the fuel rails.  I drilled and tapped holes for M5 button head set screws and used stainless P-Clips.

I cable tied some of the gearbox wiring to the fuel hose supports since I thought this would be adequate.

I then re-affixed the transmission tunnel cover once this was all done.

No comments:

Post a Comment