I used the same copper-nickel pipe as the brake lines, and used stainless fittings. The pipes were bent into shape and I just need some clips to hold them in place.
GD427 MK IV
One of my first drives out - 8th September 2025 (St Ninian's Isle - Shetland)
Thursday, 11 January 2018
Master Cylinder Tubing
Since the pedal box was fitted, I decided to install the 3/16" pipes that go from the master cylinders to the bulkhead connectors. Stainless flexible hoses then go from the bulkhead connectors on the inner wing to the connector block at the rear of the engine.
I used the same copper-nickel pipe as the brake lines, and used stainless fittings. The pipes were bent into shape and I just need some clips to hold them in place.
I used the same copper-nickel pipe as the brake lines, and used stainless fittings. The pipes were bent into shape and I just need some clips to hold them in place.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment