GD427 MK IV

GD427 MK IV
What my car should look like when finished - Stoneleigh 2015

Tuesday, 11 February 2020

Headrests

The headrests and stainless brackets were supplied by GD.  I screwed the headrest onto the bracket and placed the headrest so that it was in the centre of the hoop's radius.  I then marked where to drill the holes and tapped the hole out to M5.

I wasnt too happy with the weld finish where the threaded boss is for the headrest, so I added some weld using the MIG, and then filed, polished back the bracket so it was smooth.

The headrests were then bolted in position using threadlock.












No comments:

Post a Comment