Rear End Work

The correct bolts for the driveshafts arrived, and have now been fitted.  

I have also finally fitted the flexible brake hoses to the rear callipers and clipped them to the upper wishbones.

The propshaft bolts have also been fitted.

I have fitted the callipers and discs, but still have to fit the pads.

I have also changed out the bolt for the handbrake anchor point so that the fitting is fully on the shank of the bolt and not threads.

I will be making a small bush for a p-clip to loosely hold the handbrake cable in position.  I will post up photos once made.  It is a M12 x 1.5mm thread, so not standard.  I am waiting on a thread die.

It's coming together.....

Driveshafts

I have now half fitted the rear driveshafts.  I filled the CV joints with CV joint grease before fitting them to the diff and hubs.  The bolts supplied for the hubs were of the incorrect thread pitch, so I have had to order some M8x50 High tensile bolts. I temporarily fitted some standard bolts just to hold it in place.

The bolts to the diff were correct and tightened up.