Exhaust Dry Fit

Apologies for not posting sooner, things have been busy with outside work and I haven't had much time in the garage.

I dry assembled the exhaust to see how it fits and also to mark where the central mounting bobbin requires to be drilled to the gearbox mount.  I pushed all the components together and it seems to fit!  I marked the bobbin and drilled the mount in situ.  I may have to rotate the cats slightly to make a bit more clearance from the chassis.  I will do this just before applying sealer and the stainless clamps.  I also need to drill the rear rubber mount to fix to the chassis.