I have run in the brake pipes to all four corners, and just have to fit the stainless p clips to fix them in position. I didn't install the rear left pipe as per the norm, since I thought I would leave plenty of room for the fuel line as I don't want to limit the flow in any way. I still have to flare the ends at the aluminium block where the two pipes meet in the engine bay, so I'll hopefully get them done shortly.
I have set the p clips in position and marked where the holes are to be drilled, so this will be one of my next jobs.
**Please see updated post showing new brake pipe run
here **
No comments:
Post a Comment